Project Description
I. General Introduction
ISA1598 6-Position ANSI Socket Meter Box for FM1S or FM2S is developed by iSmart meters. This ANSI Socket Meter Box offers maximum flexibility and ease of installation to meet requirements of multiple position metering projects. The outdoor/indoor rated devices are available in two- to six-gang set-ups which consist of a pull section with main lugs or stud terminations, and four/five jaw meter sockets with tenant main circuit breaker provisions. The units operate on 120/240 Volts AC one to three-watt systems and are available with either 125 or 200 ampere meter sockets to meet a wide variety of small apartment and commercial building applications.
A fifth jaw accessory kit is available for use on 120/208YV AC one- to three-watt network systems. The attractive Uni-PAK devices accept overhead or underground service terminations and are designed for wall-hung surface or semi-flush mounting. The devices are factory pre-bussed in a compact enclosure to ensure ease of handling and installation, and to maximize wall-space efficiency. Accepts Siemens’ exclusive 200 ampere/position QS breaker for quicker wiring (breakers not included). Removable knock-out plate allows for back exit. Easily hang on the wall with the mounting rail. All unmetered bus is barriered and sealable to prevent unauthorized access. Galvanized steel with electrodeposited paint provides uniform coverage for long-lasting protection and sharp appearance.
Technical Features:
- Uses HV type hubs on top endwall
- UL listed for: service equipment, use with 60/75°C wire, and short circuit ratings up to 100,000 RMS symmetrical amps at 240V AC
- Use QP or QPH type Siemens breakers
- Check with utility prior to installation to confirm acceptance
- Breakers not included, use Siemens type QS breakers
- Pull section lugs not included
- Front accessible 4- or 5-jaw sockets with individual ring or ringless type meter covers
- Fifth jaw is field installable at 6 or 9 o’clock
Function&Feature
| High quality steel with sprayed plastic coating for durability; |
| Equipped with three phase CT circuit breaker controlled by meter; |
| Transparent PC viewing window with weatherproof rubber gasket rope. |
| Reed switch fault detection Lockable and sealable front window for credit charging and status clearing. |
| Lockable and sealable bottom window for MCCB switch on/off. |
| Compliable to STS standard features. |
| Through keypad of UIU or MCU to charge TOKEN |
| Addable GPRS module for communicating with AMI system. |
| Cable incoming and outgoing holes protected by cable glands |
Main Parameters
| Item | Description |
|---|---|
| Maximum Amperage | 125A |
| Product Type | Horn Bypass Meter Sockets |
| Feed Position | Overhead or Underground |
| Cover Type | Ringless |
| Recommended Environment | Outdoor |
| Weight | 28kg |
| Warranty | 1 Year |
| Dimension | 900mm X 720mm X 160mm |
