PG Circuit Breaker of 2P&4P with 300mA or 500mA

PG circuit breaker of 2P&4P with 300mA or 500mA

PG circuit breaker of 2P&4P with 300mA or 500mA ranges from 5 to 60 A, 2P (1 Ph + N) or 4P (3 Ph + N), with or without earth leakage protection (300mA-500mA or 650mA) good product to suit each type of installation. It complies with NFC 62-441, IEC60947-2 French standard.

Operating principles

• Service connections are the interface between the Utility and the end­ user customer.
• They connect the customer’s electrical installation to the power distribution network.

Advantages

• Low-cost product, suitable for conventional service connections.
• Multiple rating device.
• Several levels of earth leakage sensitivity.
• Complies with the French NFC 61 450 standard.

Safety

■ Thermal compensation

□ The pole settings are not affected by the ambient temperature.

■ Residual current device

□ Highly reliable, self-powered system

□ Immunized against voltage surges of atmospheric origin

□ Uninterrupted power supply for greater user convenience.

■ Prevention of overvoltage

□ The neutral pole is designed to close first and open last to maintain a fixed potential.

Electrical characteristics

■ Earth leakage break time

□ < 0.2 s for 1 lAn

□ < 0.1 s for 2 lAn

■ Earth leakage tripping

□ 300 mA, 500 mA or 650 mA, self-powered

■ Operating temperature

□ – 5 * C to + 55 0 C

■ voltage drop

□ 1 pole + neutral < 0.9 V

■ Insulation resistance

□ > 2 MQ

■ Dielectric withstand

□ 2 kV AC for 1 minute

□ 4 kV between poles and frame

■ Tripping curve

□ C type

Other characteristics

■ Corrosion withstand

□ 8 days in damp chamber (CCTU4 cycle)

■ Weight:

□ 2-pole: 0.6 kg – 4-pole: 1.0 kg

Easy operation

■ Operation in all positions

■ ON/OFF control by push-button

■ Rating easily changed

■ Lead-sealable terminal shields

■ Captive terminal screws

■ Pivoting terminals

■ Copper cables up to 35 mm2

■ Neutral identified in blue

Environment

■ IP 40 protection

Prevention of overvoltage

• The neutral pole is designed to close first and open last to maintain a fixed potential.

Protection against nuisance tripping

• Immunized against voltage surges of atmospheric origin
• Uninterrupted power supply for greater user convenience

Display of contact position

• Green indicator: contact open
• Red indicator: contact closed

Safety checking

• The test button may be used to simulate an earth leakage fault, thereby providing a simple way to check the system.

Easy operation

– Operation In all positions

• ON/OFF control by push-button
• rating easily changed
• lead-sealable terminal shields
• captive terminal screws
• pivoting terminals
• copper cables up to 35 mm²
• neutral identified in blue